Contractor Insights: Industry Experts on the New PaneLok Fixing
When a new fastener is introduced specifically for a widely used insulated panel system, contractors want more than marketing claims. They want to know how it performs on site, whether it reduces common problems, and if it is genuinely worth specifying.
That’s why feedback from experienced roofing consultants is valuable. In a recent Kingspan video, Phill Smith from PLS Roofing Consultants shares his thoughts on the new PaneLok fixing, which has been designed specifically for the Kingspan QuadCore® KS1000RW insulated roof and wall panels. You can watch the full video here: Kingspan Fastener Solutions: Our New PaneLok Fixing.
In this article we look at why expert commentary matters, the practical issues PaneLok is designed to address, and what contractors should consider when evaluating the product.
Why Contractor Feedback Matters
Generic fasteners are still widely used on insulated panels, even though many of the most common site problems are well known:
- Fasteners unwinding over time due to thermal movement and vibration
- Over-driving that damages the outer sheet and compromises the seal
- Thread stripping, especially on thinner steel substrates
- Inconsistent weather sealing leading to leaks and callbacks
- Difficulty identifying which fasteners have been used once the job is complete
These issues cost time, money and reputation. A purpose-designed fastener that has been independently assessed and reviewed by industry practitioners is therefore of real interest to contractors and specifiers.
What Makes PaneLok Different?
PaneLok is an A2 stainless steel fastener developed specifically for Kingspan QuadCore KS1000RW panels (80–137 mm thickness) and steel substrates from 1.2 mm to 3.0 mm. Key design features include:
- A unique tapered thread that locks the fastener in place and improves resistance to unwinding in service
- Reduced risk of thread stripping and over-driving
- A domed washer that provides controlled compression of the EPDM seal for a more reliable weather-tight joint
- A unique head stamp for easy on-site identification
- Availability with 16 mm or 19 mm aluminium/EPDM washers
Importantly, the fastener has been SCI assessed. The Steel Construction Institute reviewed technical data and test results and confirmed beneficial performance in terms of enhanced resistance to thread stripping, over-driving and unwinding in service. For contractors, independent assessment provides a level of reassurance that is difficult to obtain from standard product literature alone.
Kingspan also clearly states that PaneLok should be installed with a screw gun (8 mm hex drive) and does not recommend impact drivers. This aligns with best practice advice many experienced contractors already follow, as impact drivers can more easily lead to over-driving and inconsistent torque.
Expert Perspective
While the full commentary is best viewed in the video itself, the fact that an independent roofing consultant such as Phill Smith of PLS Roofing Consultants was invited to review the fixing reflects a practical, contractor-focused approach. Industry specialists typically evaluate new products against the real-world problems they encounter most frequently — installation consistency, long-term security of the fixing, and weather performance.
From a contractor’s viewpoint, the combination of a locking tapered thread, controlled washer compression and SCI assessment addresses several of the highest-frequency complaints associated with generic panel fasteners. The unique head stamp is a small but useful detail for quality control and future maintenance records.
Practical Considerations for Specifiers and Installers
When evaluating PaneLok for a project, contractors and designers should consider the following:
- Panel and substrate compatibility — Confirm panel thickness (80–137 mm for KS1000RW) and total steel thickness (1.2–3.0 mm).
- Washer selection — Choose the 16 mm or 19 mm washer according to the application and any project-specific requirements.
- Installation method — Use a screw gun rather than an impact driver to achieve consistent results and avoid over-driving.
- Documentation — The unique head stamp makes it easier to verify that the specified fastener has been used.
- System approach — Using a fastener engineered for the KS1000RW panel helps maintain the performance characteristics of the overall insulated panel system.
Performance data (pull-out, pull-over, tensile and shear values) is available on the product data sheet and should be reviewed for specific structural requirements. As always, project-specific advice can be obtained from Kingspan’s technical team.
Conclusion
New fasteners succeed when they solve real problems that contractors face every day. PaneLok’s combination of a locking tapered thread, weather-focused washer design, A2 stainless steel construction and independent SCI assessment positions it as a purpose-built solution for Kingspan QuadCore KS1000RW roof and wall panels.
Industry expert review, such as that provided by Phill Smith of PLS Roofing Consultants, adds practical context that pure technical data cannot. For contractors and specifiers looking to reduce the risk of unwinding, over-driving and weather-related callbacks, PaneLok is worth serious consideration.
Ready to Specify or Order PaneLok?
Whether you need technical advice, project support or want to order PaneLok fasteners for your next KS1000RW installation, the team at Insulated Panel Store is here to help.
Order PaneLok directly:
Kingspan PaneLok Stainless Steel Roof Panel Screws – Insulated Panel Store
Contact the Insulated Panel Store team:
- Website: www.insulatedpanelstore.co.uk
- Email: info@insulatedpanelstore.co.uk
- Support Hotline: 0808 196 9212
Speak to the team about availability, technical queries, washer options (16 mm or 19 mm) or to place an order for your project.
Learn more about PaneLok and download the technical data sheet on the Kingspan website:
panels.kingspan.com/en-gb/products/kingspan-fastener-solutions/panelok